Use cases > BMS Integration

Connect the BMS units in your portfolio and turn every alert into action

Fracttal integrates with your building management systems just as they are installed, whether they have an API or not. Every alert reaches your control center with its priority assigned and is tracked from the moment it triggers until it is closed.

Connect the BMS units in your portfolio and turn every alert into action

How the BMS integration module works for your portfolio

Every building speaks a different language

In a Facilities Management contract, BMS units from various manufacturers and generations coexist, each with its own alert coding system. The control center ends up applying a different criterion for every building.

The integration module translates data from each BMS into a common criticality level and asset family. Your control center receives all alerts in a single format and applies a unified procedure, no matter where the notification comes from.

This is how you operate your entire portfolio from a single place with the same service standard.

Every building speaks a different language

The building system does not have an API

Many buildings operate with building management systems (BMS) that were installed years ago and don't offer APIs. All they provide is an email alert or a field protocol.

If the system sends emails, Fracttal reads a dedicated mailbox and extracts the asset, location, and severity from each message. If the system is closed, a field gateway connects and sends alerts to the cloud via an encrypted channel.

Integrate each building as it is, and cover your entire customer portfolio.

The building system does not have an API

Critical alerts can arrive at any time

Critical alerts also occur at night and on weekends, when the team is operating at a minimum. If reaching a technician depends on calls and manual processes, the response time is delayed.

A rule defined by your team creates a work order with its priority and notifies the on-call technician via WhatsApp or the app. The technician arrives with the asset's history on their mobile device, and every step is recorded from the alert to closure.

Your technicians are informed earlier, they solve the problem faster, and you show the customer how long it took.

Critical alerts can arrive at any time

A single fault triggers dozens of alerts

A failure in a primary system triggers alerts in all systems that depend on it, and some of these alerts then trigger again. If each system opens its own work order, the inbox fills up with duplicates.

The integrations module groups alarms arriving within the same time window, discards duplicates, and filters out fluctuations. Fracttal creates a single work order and records the reset when the BMS reports it.

Your team focuses on the actual failure, and the control center tray reflects what's really going on.

A single fault triggers dozens of alerts

From BMS alert to WO closure

The integration module receives the alert and applies the rules defined by your team. From there, the incident follows the same workflow as any other work order in Fracttal.

 
The BMS triggers the alert

Paso 1

The BMS triggers the alert

The integration module receives it through the connection method established for each building.

Fracttal interprets it

Step 2

Fracttal interprets it

Fracttal One identifies the affected asset and assigns a criticality level consistent across the entire portfolio.

The defined rule decides

Step 3

The defined rule decides

Based on the conditions set by your team, Fracttal One creates a service request or a work order.

Notify the right person

Step 4

Notify the right person

The notification reaches the appropriate profile through your configured channel, including WhatsApp.

Close with evidence

Step 5

Close with evidence

The technician executes tasks from their mobile device using checklists and photos, closing the order with full traceability.

Choose how to connect each building

Every BMS offers different connection methods. The integration module adapts to whatever system is in place, allowing you to incorporate buildings with varying generations of technology.

Email Inbox

Many BMS units already send alerts via email. Fracttal reads a dedicated inbox, interprets each message, and can even reply via email to systems that require it.
Dedicated inbox Email response

Field Gateway

Para sistemas cerrados o heredados, un gateway instalado en el edificio se conecta por protocolos industriales y envía las alertas a la nube por un canal cifrado.
BACnet/IP Modbus TCP OPC UA

All contract operations in one place

With Fracttal's product suite, every BMS alert enters the same platform where you run your entire contract—from statutory preventive maintenance to subcontractors. What the building detects ends up reflected in the KPIs you present to your client.

Control the contract and prove accountability with data

Check which WOs remain open and who is assigned to them across all buildings in the portfolio. Using this same data, your client receives verifiable reports on preventive maintenance compliance and contract response times.

Contract-and building-level dashboardsContract-and building-level dashboards

Response times measured by priorityResponse times measured by priority

Power BI-connected reportsPower BI-connected reports

Control the contract and prove accountability with data

A single standard for your team and subcontractors

Schedule statutory preventive maintenance for each installation and let work orders generate automatically when due. External vendors receive them via the mobile app and work using the exact same checklists as your internal team.

Installation-based plans with expiration alertsInstallation-based plans with expiration alerts

Tailored contractor visibilityTailored contractor visibility

Costs attributed to each interventionCosts attributed to each intervention

A single standard for your team and subcontractors

Control in the field, the material and the time of each intervention

The technician scans the QR code to start and close the work order, so the actual working time is recorded in front of the team. The materials are charged to that same work order, and the app continues to function in basements and technical rooms without network coverage.

Multi-warehouse with minimum stock alarmMulti-warehouse with minimum stock alarm

WO initiated and closed by QR, with its effective timeWO initiated and closed by QR, with its effective time

Offline mode in the mobile appOffline mode in the mobile app

Control in the field, the material and the time of each intervention

Let's talk about the BMS Units in your portfolio

In 15 minutes, we will review the systems in your buildings and how we can connect them with Fracttal.

Implementation in weeks · 24/7 Support · ISO 27001

Fracttal-AI

AI works on the alerts already inside Fracttal

Once each BMS alert enters the platform, Fracttal AI agents have the context they need to assist your control center.

Agents inherit user permissions, and all high-impact actions require human approval

Agents inherit user permissions, and all high-impact actions require human approval.

Implementation: going live in weeks

We accompany you through every phase, from system inventories to daily operations.

1 - Technical survey

Technical survey

We review each building's BMS and available connection methods with you. Before integrating, we load the asset and location catalog into Fracttal.

2 - Integration configuration

Integration configuration

We connect each system adhering to IT security standards and define the rules that turn alarms into work orders.

3 - Deployment and operation

Deployment and operation

We incorporate systems and sites in waves, at your pace. The integration is monitored from day one so no alert is ever missed.

Frequently asked questions

Questions frequently asked by operations and IT teams before connecting a BMS.

No. The BMS continues monitoring building installations, while Fracttal captures its alarms to turn them into assigned, tracked work.

Fracttal can read the alarm emails already sent by the system or connect via a field gateway using BACnet/IP, Modbus TCP, or OPC UA.

Yes. The integration module translates the code from each system into a common severity level and asset family, so that the control center operates using a single standard.

Alarms received within the same time window are grouped together, and duplicates are discarded. The result is a single work order for each actual incident.

Data is transmitted using end-to-end encryption, and the integration uses dedicated service accounts with credential rotation. Fracttal holds ISO 27001, SOC 2, and ENS certifications.

Yes. Fracttal can send the customer's incident manager the information they need, in their preferred format, so that no data is recorded twice.

It is measured in weeks. The timeframe depends on the number of systems and the connection method offered by each one, and we determine the exact duration during the survey phase.